Audi Brakes 101- Tips to Give Long Life to Your Luxury Car Brakes

How quickly and safely you stop your car is directly related to road safety. To stop safely, you need consistent braking performance on various surfaces. Even though having oversized brake rotors on all four wheels may help you plug in the shortest amount of time, sometimes just stopping is insufficient.

You must maintain top-notch breaks to accomplish this. Compatible brake pad and disc replacement, brake bleeding, and ABS checks can all help you come to a quick stop, but saving brakes will always keep you one step ahead. We'll go over eight braking tips to help you drive more safely and extend the life of your automobile's brake pads and discs to ensure you don't have to rely too much on replacing them frequently with Audi spare parts.

1. Whenever you can, apply the brakes gently.

The first and most crucial advice for braking is to use light pressure whenever possible. In other words, slow down when braking to bring your automobile to a stop when there isn't an immediate necessity. You can even try Audi spare parts.

Applying light pressure to the brake pedal is more critical than stomping. Your brake pads will last longer if you brake gently, and you'll also avoid any hit from behind. By giving the drivers behind you more time to respond, lightweight brakes will also increase their level of safety.

2. It's an excellent idea to coast.

Can you see a red light up ahead? Instead of stepping hard on the gas and slamming into a stop within a few feet of the stop line, let go off the accelerator and let the car drift to a halt. Like moderate braking, coasting is a tactic that will increase mileage while protecting your brake discs and pads. Other auto parts will experience less wear and tear as a result.

3. Shifting down to lose speed 

Your ally is engine braking. In many common instances, you can reduce the need to use the brakes by downshifting in advance of a speed breaker and allowing the car's engine to slow down. Engine braking is the process of downshifting to lessen an automobile's speed.

For instance, if you are traveling at 50 km/h in fourth gear, simply slipping into third gear will allow you to slow down the vehicle to 30–35 km/h without applying the brakes. For downhill stretches, engine braking is essential since it lets your brakes cool out and keeps your car moving downhill safely.

4. In no circumstances should you coast down a slope in neutral.

When descending a slope, keep the car in the lowest gear. Who among us does not wish to save fuel? Downhill sections are incredibly alluring when leveraging the car's momentum to get you across a stretch while consuming the least energy. Many drivers frequently switch to neutral to increase the car's speed on downhill portions. Never do it in three words. 

Without the engine braking, there is no drive or neutral, which is difficult on the brakes and quite dangerous because the automobile can quickly gain excessive speeds, especially when hurtling down a ghat road. In reality, a vehicle's lack of control owing to overheated brakes is a common cause of accidents on the ghats. 

A proven method to overheat your brakes and perhaps result in brake failure is to utilize neutral when descending a long hill. When driving downhill, use the downshifting technique to lose speed and ensure you are in the lowest gear feasible to control rates.

5. Maintain a safe gap between your vehicle's front and back.

Maintaining a safe distance behind the car ahead of you will provide you and your brakes ample time to stop your car safely in an emergency or panic-stop situation. A longer stopping distance naturally entails more gradual braking and less brake wear. 

Maintaining a reasonable distance from the car in front of you will help you avoid hitting on rear-end should you apply heavy braking. Compulsive tailgaters behave in complex ways, but you can always slow down and let them pass you. You should ensure that tailgaters are maintained safely away for your benefit.